The STUDDED Fin Tube is...
read moreEXTRUDED FIN TUBE (BIMETALLIC FIN TUBE ) :-
The Extruded Fin Tube also known as Bimetallic Fin Tube is one of the most preferred finning processes for various applications.
The fins are manufactured by Extruding the Fins on the Aluminium Muff Tube which is made to Fit with close tolerance over the Base Tube .
The Extrusion takes place on a Continuous Fin Extruder with Three Tooling rolls and extrusion takes place at high pressures in the range of 1200 psi . Because of the cold working process the Bond between the Tube and fin is flawless and hence gives excellent Heat Transfer Efficiency. At the same time the mechanical strength of the fins is also enhanced drastically.
These Fin Tubes find application in AIR FIN COOLERS, DRIERS, RADIATORS etc and are preferred in Industries like Food and Agriculture , Power Plants , Chemical Industries , Steel Plants , Chiller Plants etc,
Properties of Extruded Fin Tubes (Bimetallic Fin Tube ) :-
Fin To Tube Bond :- Excellent
Heat Transfer Efficiency :- Excellent
Mechanical Resistance: – Excellent (Hence can be frequently cleaned with high pressure jets unlike other fin tubes. Thereby reducing down time and increasing overall life)
Corrosion Protection: – Gives excellent corrosion protection to the base tube since it entirely covers the base tube (except bare ends).
Temperature Range :- Upto Maximum 300 Deg C
Manufacturing Range (Extruded Fin Tube / Bimetallic Fin Tube ):-
Sr.No |
Particulars |
Range |
1 |
Base Tube Material |
Stainless Steel, Carbon Steel , Alloy Steel, Titanium , Copper, Duplex Stainless Steel, Inconel etc. (all material in the theoretical limit ) |
2 |
Base Tube Outside Diameter |
12.70 mm to 38.10 mm |
3 |
Base Tube Thickness |
1.50 mm And Above |
4 |
Base Tube Length |
500 mm Min To 15000 mm |
5 |
Fin Material |
Aluminium , Copper |
6 |
Fin Thickness |
0.3mm ,0.35mm , 0.4mm , 0.45mm ,0.55mm,0.60mm,0.65mm |
7 |
Fin Density |
197 FPM ( 5 FPI ) to 433 FPM ( 11 FPI ) |
8 |
Fin Height |
9.8 mm to 16.00 mm |
9 |
Bare Ends |
As per Client Requirement |
10 |
Manufacturing Capacity |
5,00,000 Metres Per Annum |
We can supply material on urgent delivery basis because of large stock and relations with raw material suppliers. We use only Prime Quality base tube and Aluminium Material.
The Extruded fin Tubes can be supplied with EN 10204 EN 3.1 and EN 3.2 certifications . We can provide Third Party Inspection from any reputed inspection agency.
EXTRUDED FIN TUBE CROSS SECTION
EXTRUDED FIN TUBE ACTUAL TUBES SUPPLIED TO THE CUSTOMER